碳纳米管阵列推力器放电特性的数值模拟研究

基于直接蒙特卡洛(DSMC)算法、浸入式有限元算法(IFE)、粒子云及蒙特卡洛碰撞(PIC-MCC)算法以及Ammosov-Delone-Krainov(ADK)隧穿电离模型建立了碳纳米管阵列推力器工质气体和CNT场电离过程的三维仿真模型。利用文献中的实验数据对本文仿真模型的有效性进行了验证,结果表明本文仿真模型与实验结果基本一致。针对碳纳米管阵列推力器的放电特性进行了研究,并重点分析了离子与原子碰撞过程对碳纳米管阵列推力器放电特性的影响。结果表明CNT可以极大地增强局部电场,稳态时场增强因子约为1308;与原子的碰撞使得离子在CNT附近更加集中,降低了局部电场,进而降低了其场增强能力。     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.     

面向下一代运载火箭的综合电子系统集成技术

介绍了面向下一代运载火箭分布式模块化电子系统(DIMA)的集成技术及系统架构。针对下一代运载火箭复杂电子系统的特点，按照系统集成的路线，对系统设计目标、系统功能需求分析、系统抽象机制、系统综合技术等多方面进行论述。首先，根据电气系统功能获得系统需求，采用功能抽象和层次抽象定义系统抽象模型，提取出高内聚低耦合的原子功能模块，并对模块的属性、交换关系、时序约束关系等进行定义；然后采用可视化表征方法对系统进行深入分析，利用系统综合技术实现了从系统功能到硬件资源的映射，从而给出了集成控制单元和模块的种类；随后采用分时分区的设计理念对系统节点分区划分方案及容错架构进行了定义，并对分区操作系统的调度模型和交换式的数据交互网络进行了论述，最终给出了系统软硬件架构。     

系统参数对电动力绳系动力学的影响

将电动力绳系(EDT)的主星质量、子星质量、绳系质量以及绳系中的电流视为系统参数，研究这些参数对系统的摆动动力学和轨道动力学的影响。哑铃模型下的电动力绳系摆动动力学方程存在不稳定的周期解，通过Floquet理论来衡量周期解的不稳定程度，从而研究各系统参数对摆动动力学的影响。建立了用春分点轨道元素的形式描述的电动力绳系轨道动力学方程，并以降轨时间来衡量电动力绳系的降轨效率，从而研究系统参数对轨道动力学的影响。运用算例对周期解迁移矩阵的特征值、降轨时间随各系统参数的变化关系进行了仿真，分别得出了各系统参数对系统摆动动力学和轨道动力学的影响。综合本文的仿真结果，并考虑实际发射及空间运行中的其它因素，对电动力绳系的设计和降轨策略提出了建议。     

椭圆轨道卫星对地全球覆盖电推进控制

针对椭圆轨道卫星近/远地点的星下点对全球或特定纬度区域的访问问题，提出一种连续小推力下的对地覆盖控制策略。首先，推导了自然摄动对卫星拱线变化的影响，并探讨了进行小推力覆盖控制的必要性。然后，针对燃料消耗的优化问题，将控制方程展开成含傅里叶级数的形式，用以获得便于星上计算的解析形式的次优解，同时探讨了截取阶数与优化程度的关系。在进行拱线控制的同时，通过合理设置约束，对椭圆轨道的近地点高度进行保护，确保卫星安全运行。仿真结果表明，提出的方法能够以适当的燃料消耗代价实现椭圆轨道的近/远地点的全球覆盖控制或特定纬度区域的反复推扫，且控制力在可接受的范围内。     

惯性静电约束推力器放电过程数值模拟研究

为了研究惯性静电约束推力器(Inertial Electrostatic Confinement Thruster,IECT)的放电原理和工作机制,采用漂移-扩散流体模拟方法,基于圆柱形惯性静电约束推力器的结构,研究不同栅网线直径、栅网个数、推力器尺寸条件下等离子体放电情况和阴极电压、背景气压对推力器放电的影响。结果表明:在所研究条件下,保证阴极必要的几何透过率的同时,适当增加推力器栅网个数可以提高喷射离子密度,减小羽流发散角;随着阴极电压和背景气压的增大,推力器喷射的等离子体密度增大。但是,压强继续增大会达到临界值,等离子体被约束在推力器内部无法喷出,即喷射模式无法运行,故阴极电压与背景气压对IECT均有较大影响。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

关于设计保证系统适航独立核查的思考

民用飞机主制造商建立设计保证系统，旨在民机研制过程中充分发挥自主适航的能力，通过组织机构、职责、程序和资源落实设计、适航以及独立监督三大职能，以保证航空产品的设计或者设计更改满足适航当局的要求。其中，设计保证系统适航职能的适航独立核查功能正是这一保证的关键。基于对设计保证系统适航独立核查功能的具体分析基础上，从设计保证系统的规划与设计层面提出了实现适航独立核查功能的机制，给出了机制中需明确的责任主体、职责与资质要求、工作流程与支撑工具以及管理程序等方面的建议，并从大数据知识的技术支撑和阶梯式递进的人才培训保障两方面以不断优化改进的方法工具与人力配置来深化适航独立核查的功能与效果，进而增强设计保证系统对飞机型号研制的保证作用。     

集团化实验室信息管理系统中台建设实践

中台通过重新构建企业级的服务能力，消除企业内部各业务部门、各分子公司间的壁垒，可更好的适应企业发展。描述了当前中台发展现状，结合集团化计量检测机构特点，提出了实验室信息管理系统中台的一种划分方法，为集团化实验室信息管理系统建设提供一种解决方案。实现企业业务、资源、财务的综合管理，提升企业管理能力。     

Application of Wuhan Ionospheric Oblique Backscattering Sounding System (WIOBSS) for the investigation of midlatitude ionospheric irregularities

An upgrade of Wuhan Ionospheric Backscattering Sounding System (WIOBSS) was developed in 2015. Based on the Universal Serial Bus (USB), and a high performance FPGA, the newly designed WIOBSS has a completely digital structure, which makes it portable and flexible. Two identical WIOBSSs, which were situated at Mile (24.31°N, 103.39°E) and Puer (22.74°N, 101.05°E) respectively, were used to investigate the ionospheric irregularities. The comparisons of group distance, Doppler shift and width between Mile-Puer and Puer-Mile VHF ionospheric propagation paths indicate that the reciprocity of the irregularities is satisfied at midlatitude region. The WIOBSS is robust in the detection of ionospheric irregularities.